Alvin
Forum Replies Created
-
AuthorPosts
-
Alvin
MemberI checked a couple of videos about the Mixdeck Quad, and I think they are really good. With the layout, it reminds me of my CDJ800s. I think it’s a very solid controller, since it supports USB too it certainly is a win win 🙂 if that’s something that you want go for it.
MemberWe DJs usually use whatever equipment that is in the club. I do bring my controller in the club, they don’t mind as long as you play the music that keeps the crowd going.
I just checked the Mixdeck Quad that you were talking about, i think it’s quite neat, but I haven’t seen much feedback to it. Maybe you should let others buy it first and then ask for their feedback, you don’t want to be a guinea pig for a hefty $999.
The Numark NS7 has motorized platters but they are really big and expensive. They are the closest thing that comes to my mind when it comes to controller that emulates a CDJ.Do you still want to go for CDs? I mean I started with Vinyl and CDJs, but I’m moving to digital… carrying all those vinyls and CD bags are quite a hassle. All you really need is to get familiarized with the CDJs motorized platters and the interface that’s it. Anyways, when you start earning your own money perhaps a DJ or something else. CDJs and Vinyl might be extinct already 🙂
MemberI’ve seen no issues with the highs being weak. Maybe you can demo a TM4 in a store and bring your unit so you can compare if they are actually defective. I demoed a TM4 once, but it just sounded the way my DJ3 sounds.
The firmware is described in the manual, it says something about holding the shift button and cues while connecting it to the computer.
MemberPros simply use Traktor for one reason, it simply works out of the box. While, VDJ may have more they don’t integrate tightly, you still have to reprogram it to do the thing that you want.
It’s like this question. Why does the new generation chose Mac, because it works, it gets the job done without the additional bloat. Sure that VDJ has more than 2000 features because its an open format. But, are you actually going to use all that in a set? Think about it.
What’s important is the substance not the volume of features. Traktor just gives you a better feel. If you are a newbie DJ sure I’ll recommend VDJ, but if you have gone all the bells and whistles of DJing, it’s Traktor and Serato for sure.
MemberThis is actually an issue with the controller in particular. There is a thread at the Reloop support forums about the Terminal Mix 4 crackling sound, I think the sol’n to it was to update the firmware. I have a Reloop myself, the Jockey 3 and the Mixage, but I never have had any issues. Reloop is a very reliable except for those early controllers like the DJ2 which had issues with the transport buttons.
MemberWhen it comes to software performance and flexibility, Traktor is the choice of pros. I find VDJ’s interface too messy and the scripting mapping is none too helpful. Loops, cues, grids is simply better in Traktor.
But, with Numark Mixtrack, it seems that it is tightly integrated for VDJ than any other software. If you are planning to use the Mixtrack for a long time, then go with the VDJ. But, if you want to upgrade to mid-high-end controllers, then Traktor is the way to go.
MemberBlaccFriday, post: 21946, member: 1090 wrote: Wow, really? It’s sounding like I should just get those then. What mixer would you recommend with that?
I always loved pioneers for their mixers like DJM850. I would actually go for the DJM850 than the DJM2000, my hands gets crossed up with the DJM2000s, the 850s are pretty straight forward, but you may like to go Denon all-out like the Denon DN-X1100.
Right now Denon’s CDJ offering beats the Pioneer’s CDJ2000, Pioneers still have the edge when it comes to mixers.
MemberMac fewer headache agree.. plug and play
MemberIf you are using a Virtual DJ Pro, do the ff:
1. Go to Config
2. Go to Sound Setup tab
3. Click Outputs
4. Select Advanced Config
5. Click Advanced Config
6. Click +, add Master, select “Numark N4”, select “Outputs 1&2” for RCA if you are using an unbalanced setup or choose accordingly.
7. Click + again, add Headphones, select “Numark N4”, select “Outputs 3&4” for headphones check Numarks manual or test it one by one.That’s it.
With Traktor, its the same concept go to Settings, Audio Setup, Select Numark N4, Go to Output Routing, Internal, Select the appropriate out for your master and monitor outputs. That’s it.
If you are using a Windows based computer, you may have to install the driver that comes with the package, with Mac it is simply plug and play.
MemberDavid Guetta. He is a better producer, than a DJ that actually mix. As long as he produces songs that will make people dance then he’d stay up there.
MemberI actually work for them, Apple. Industrial designer by day, DJ by night lol. Anyways, solid state drivers are better than legacy hard drives with spindles for many reasons (1) they are faster (2) they are more reliable, no moving parts, no bad sectors (3) they weigh less… downside is that you pay for a premium.
With the 13″ and 15″ deal, if you are working with Traktor, then the interface will be very tight, you may have to turn some interface off. With the 15″, you see everything.. Your favorites, hotcues, full track view, etc. 15″ works especially when you are using 4 decks, and samplers.
As a DJ, and not as an employee. I would personally pick a Pro anytime than the Air. It gives me more flexibility. But if you are going for a 13″ then go take the Air over the Pro. CDs are rarely used anyways, unless you are rocking with a CDJ.
MemberIt’s actually easier to beatmatch manually with a CDJ than a controller in my experience. Perhaps because of the long-pitch faders. The easiest way to beatmatch using a CDJ is using the jog’s pitch bend. Everytime you hear a snare drop, move the jogs up and down like strumming a guitar, then release it. With a little adjustment it the beat will be match in seconds.
Phil is right about the Denon SC2900, it’s just amazing. The interconnect capability is something that should’ve been there for a long time. Although, I’m not a fan of its look, but it’s probably the best CDJ to date.
June 12, 2012 at 3:20 am in reply to: Numark Mixtrack Pro + Laptop + Software am i ready to dj a bar? #1006030MemberYes, I think so 🙂 As long as you made your homework. Before you start djing in a venue (club or bar) be sure to check what people in those bar listens to. Are they a house crowd? a hiphop crowd? a trance crowd? then, select tracks that fits into their taste, you can add some toppings of your own into your set once in awhile. That way you’ll have your own signature.
MemberSince I came from DJing with CDJs and Vinyls, I got myself a real 4 deck controller and I mean physically 4 decks with jogs. LOL… Transition to CDJs to MIDIs is smooth so far. I’m considering getting either a TM4 or a 4Trak next. Loving the Reloops, they sure a well-built for a compact controller.
MemberIn my experience starting up with a dubstep tune in a club is hard. You have to get the crowd going first before plugging in some serious dubstep.
If I am assigned for the opening, I usually start with instrumentals, slow trance, then build it up with some house… add some comercial songs in the middle (a little seasoning)… then when the crowd starts to get into it that’s when I go for hardcore house and dubstep.
Go to youtube, there’s a full set by Hardwell on Ultra… See how a pro does it
-
AuthorPosts