Virtual DJ Mixtrack Edge No Audio

This topic has 11 replies, 4 voices, and was last updated 10 years, 2 months ago by Axel Dark-Key.

Viewing 11 posts - 1 through 11 (of 11 total)

Author

Posts
January 26, 2016 at 10:39 pm #2346461

DJ Vintage
Moderator

Clearly there should be sound. I do understand that setting VDJ correctly for sound output might not always be straightforward.

I’ll leave this one for one of our more experienced VDJ users, perhaps there is even one with the same controller so you can easily compare note.

Good luck.

January 27, 2016 at 1:04 am #2346581

bob6397
Participant

Can you post a screenshot of the audio settings page?

And have you installed the latest drivers for the controller? The audio settings should use the “ASIO” drivers in windows..

If it’s a full VDJ license as well, you should take advantage of the free upgrade to Virtual DJ 8 as well. It’s much easier to setup..

bob6397

January 27, 2016 at 2:11 pm #2347051

Axel Dark-Key
Participant

I tried to post the screenshots, but it won’t let me. It keeps asking for a URL instead of letting me post it directly.

So far the two main settings that I have tried were:

ASIO v.2 Master Ch3&4, Headphones Ch1&2; Speakers Realtek Digital Audio

4.1 Soundcard Master Rear Output, Headphones Front Output; Speakers Realtek Digital Audio

Still no luck, I even reinstalled ASIO

January 27, 2016 at 3:46 pm #2347121

DJ Vintage
Moderator

Hey Axel, you should use a site like tinypic or something to upload your pics, then post the resulting link in your message.

January 27, 2016 at 8:02 pm #2347321

bob6397
Participant

So my understanding is that the audio should be:

ASIO Drivers

Master Output: 1&2
Headphone Output 3&4

Make sure that you have master output etc. set in VDJ as well.. There might be a dial on the controller for master volume?

bob6397

January 27, 2016 at 9:42 pm #2347341

Axel Dark-Key
Participant

Just tried all of that and made sure the dials were all the way up as well as on VDJ and still no luck. I have my PC speakers plugged into master. Audio will play on things like videos, so no need to disconnect them and plug them into the audio jack. I’m just not getting any sound from VDJ. I hope it’s not a defective soundcard.

January 28, 2016 at 4:47 pm #2347751

Axel Dark-Key
Participant

Here are the screenshots:

January 28, 2016 at 7:18 pm #2347861

Todd Oddity
Participant

Two things to correct:

1) Your outputs are backwards. Master should be 1&2. Headphones 3&4.
2) You’re not using the right ASIO driver. Do not use asio4all, use the Numark driver.

It’s been awhile since I’ve had to dig into v7 settings, but those two corrections should fix you up.

January 28, 2016 at 8:28 pm #2347901

Axel Dark-Key
Participant

Thanks for this info. Where would I find the driver on the Numark website? The only downloadable drivers that I found were for this: http://www.numark.com/product/djio and I’m not sure if this will work or not.

January 29, 2016 at 6:06 am #2348141

Todd Oddity
Participant

Hmm.. Interesting. My bad. I just did a little digging and apparently the Edge requires no drivers… so, slight change to my advice:

Inputs: None
Outputs: Headphones (master 1&2 / headphones 3 & 4)
Sound Card: 4.1, then select Numark from the drop down list.

There is a thread on the forums of someone having a similar problem and talks about how they fixed it. Worth a read: http://www.virtualdj.com/forums/182839/Hardware_Technical_Support/numark_mixtrack_edge__not_working_with_VDJ_pro.html?search=mixtrack%20edge&page=1.6

January 29, 2016 at 1:07 pm #2348241

Axel Dark-Key
Participant

Thanks. I will say I managed to install Serato and it works perfectly now. But if anyone will help me find the Numark driver for VDJ, that would be great because it will take me some time to learn Serato. I am already familiar with VDJ, its interface, and layout, so it’s easier to use.
Author

Posts

Viewing 11 posts - 1 through 11 (of 11 total)

The forum ‘DJing Software’ is closed to new topics and replies.