No sound at all coming out of Traktor pro 2

On Audio Setup, select “ASIO4ALL” for audio device. Then, on Output Routing, select “Internal” for mixing mode, on Out Master select 1: Front Left, then 2: Front Right. Output Monitor should be 3: Back Left, then 4: Back Right.

Degenerate, post: 21893, member: 2367 wrote: Alvin, in output routing the only options available for anything under the output routing tab is, “HD Audio digital out 1” and “HD Audio digital out 2”. Oh and im using a hercules e2 mixer so i’d need to use external mixer right? cheers man

So I’ve checked your controller the Hercules E2, and learned that it doesn’t have a built-in soundcard. And, the computer that you are connecting to is using a Digital-Out interface, which means your ordinary 3.5mm will not work with it. You will need a S/PDIF is a digital audio interconnect to RCA cable to be able to connect it to an external mixer or speakers.

Try using Conexant 20561 smartaudio ( (Wassapi) (Shared mode)) as your audio setup and use “internal” in your output routing select “anything” that is available on your drop down list and see if any sound is produced in your computer.

If it still doesn’t work, then your computer’s soundcard doesn’t support external audio routing, you may need to buy a DJ soundcard like one of these: http://www.digitaldjtips.com/2010/11/6-budget-dj-sound-cards/

Degenerate, post: 21893, member: 2367 wrote: Alvin, in output routing the only options available for anything under the output routing tab is, “HD Audio digital out 1” and “HD Audio digital out 2”. Oh and im using a hercules e2 mixer so i’d need to use external mixer right? cheers man

So I’ve checked your controller the Hercules E2, and learned that it doesn’t have a built-in soundcard. And, the computer that you are connecting to is using a Digital-Out interface, which means your ordinary 3.5mm will not work with it. You will need a S/PDIF is a digital audio interconnect to RCA cable to be able to connect it to an external mixer or speakers.

Try using Conexant 20561 smartaudio ( (Wassapi) (Shared mode)) as your audio setup and use “internal” in your output routing select “anything” that is available on your drop down list and see if any sound is produced in your computer.

If it still doesn’t work, then your computer’s soundcard doesn’t support external audio routing, you may need to buy a DJ soundcard like one of these: http://www.digitaldjtips.com/2010/11/6-budget-dj-sound-cards/

3D 5.1 soundcards will work as long as you have two separate outputs. But, if you want to connect it to high-powered mixers and speakers, then I recommend buying a DJ soundcard from numark or native instruments. That way there would be no distortion if you pump up the volume.

CAN SOMEONE HELP ME !