x

DJM 400 and Gemini CDJ 700

Home 2023 › Forums › Digital DJ Gear › DJM 400 and Gemini CDJ 700

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • May 4, 2017 at 4:12 pm #2556211
    Chuck Van Eekelen
    Moderator

    Mixers don’t care what is there. As long as it gives a line level input signal, it will play it.

    So, line output from the Geminis.
    Then CD input on the DJM
    Channel on front panel set to CD
    Trim knob turned up at least to the 9 o’clock position
    Make sure the crossfader is set to the deck you want to play
    Make sure your channel faders is at least 50% up
    Finally make sure you have master level up

    It should all work that way.

    May 4, 2017 at 4:59 pm #2556251
    Keith Johnson
    Participant

    Yes everything is set and it should work but its not reading the tracks on the equalizer for the channels. Ive tried USB and CDs also. My mixer works fine with a turntable. Im wondering if its the Gemini CDJ 700 and if i need something to make it work with just two cdjs and a mixer.

    May 4, 2017 at 10:44 pm #2556391
    Todd Oddity
    Participant

    Do you have two of the Geminis? Are they both not working or just one of them? From your wording, it sounds like you may only have one. If that is the case, plug something else into the same CD in RCA plug on the mixer (like an iPod or something) and see if you get any signal. If you do, then there is something off on the output of the Gemini. You shouldn’t need anything special to connect it, so it might just be a defective unit.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Digital DJ Gear’ is closed to new topics and replies.