x

Dj tech tools usb cables

Home 2023 › Forums › Digital DJ Gear › Dj tech tools usb cables

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • June 28, 2014 at 10:34 am #2039354
    Terry_42
    Keymaster

    Honestly: Any USB cable will do that is OKish shielded.
    USB either works or does not. It is digital, it does not transport anything analogue that would need superior shielding or protection.
    As long as the USB connectors sit snug in their ports you are good.
    Buying higher end USB cables is a waste of money.

    June 28, 2014 at 11:03 am #2039357
    mathewcanavan1@hotmail.com
    Blocked

    it worked out at $30 for 2 cables including shipping to the uk. I did use a cheap usb cable with a built in led which was causing me problems a couple of years ago running my audio 6 s/c…these are coloured so I can see where they are running etc in the dark.

    And I’m upgrading most of my gear ATM, so do it all at once I’ll be ok for a couple of years again 🙂

    July 3, 2014 at 5:04 am #2040466
    David Cooper
    Participant

    No dis-respect meant to Terry because my situation could be shear fluke… but was doing a gig with 2 other dj’s and 2 of us had some weird ground hum. My other half had bought me some DJTT Usb Cables for Christmas that I had never used but were in my bag (always carry spares).. I swapped the cable from my laptop to controller with built in s/card and my hum stopped.

    Like I said, maybe shutting down fixed it and maybe my other half is a sucker for paying higher prices but it seemed to work for me on that occassion. Terry please post if what I am saying is wrong because I don’t want to mislead anyone.

    Coops

    July 3, 2014 at 7:01 am #2040477
    Sandeep
    Participant

    recently purchased one for my s4 mk2.
    (just check on the straight or right-angled requirement for your purpose)
    I must say good stuff and looks sick 🙂

    July 3, 2014 at 3:53 pm #2040564
    Terry_42
    Keymaster

    There is no hum in digital… I would rather say that while hooking up the new USB cable you tossed the RCA cables around on the mixer/controllers and hence canceled the hum loop that was lying in there somewhere…. tossing around cables helps a lot of things.

    July 4, 2014 at 7:30 am #2040699
    David Cooper
    Participant

    Thanks Terry.. a hint to file away in the brain for next time. One good thing about these forums is you can always learn.
    Coops

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • The forum ‘Digital DJ Gear’ is closed to new topics and replies.