Home 2023 Forums Digital DJ Gear DJ Controllers & USB 3.0??

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #27652
    Phil Morse
    Keymaster

    It’s an awfully old controller, which is probably why nobody here can help… sorry 🙁

    #1011488

    Hey Phil,
    Thanks for the quick response, great work on that!
    So it seems like i have to look for a new controller, since the problem is in the driver itself.
    Are there any controllers you would recommend, and i know that you have a PDF on that, based on my ‘situation’?
    So with USB 3.0 support and suitable for the user experience i wrote down before??
    Thank you once again! 🙂

    #1011630
    Paul Craigen
    Participant

    if your laptop has only usb 3.0 ports and no usb 2.0 ports, then a solution is to buy a usb 2.0 hub and plug that into the usb 3.0 ports.

    #1011642
    Terry_42
    Keymaster

    Currently there seems to be a lot of problems going on with USB 3.0 and DJ controllers, especially with Windows drivers and even with many modern controllers.
    I tried to compile a list which work and which do not, but it is nearly impossible, because you also get a lot of different reports about the same controller…. so the best thing it prolly to simply grab your laptop and go to a DJ store and try some controllers on it or use a internet retailer that offers money back if it does not work for you.

    #1011645
    backtothefront
    Participant

    Terry_42, post: 28015, member: 1843 wrote: Currently there seems to be a lot of problems going on with USB 3.0 and DJ controllers, especially with Windows drivers and even with many modern controllers.
    I tried to compile a list which work and which do not, but it is nearly impossible, because you also get a lot of different reports about the same controller…. so the best thing it prolly to simply grab your laptop and go to a DJ store and try some controllers on it or use a internet retailer that offers money back if it does not work for you.

    Terry’s spot on here. There is a fairly wide problem with audio cards via USB3.0 and despite being ‘backwards compatible’ there is quite a difference between the two standards. This affects all OS including Mac OS. There has been extensive investigations by the NI Traktor Forum members to find workarounds, some include uninstalling USB3.0 drivers and forcing USB2.0 drivers to be installed for the ports as well already mentioned using a powered USB2.0 hub. Some work, some don’t but the general picture seems to be it’s the group behind USB3.0 who are responsible as opposed to the manufacturers of soundcards (NI for example) as the suggestion is there is an inherent stumbling block with audio via USB3.0. I’m not sure about this myself, but hey I’m no expert. A solution must be found as more and more laptops/PCs coming to market will be USB3.0 only.

Viewing 5 posts - 1 through 5 (of 5 total)
  • The forum ‘Digital DJ Gear’ is closed to new topics and replies.