x

Problems with Marker/Sticker drift on DDJ-SX2

Home 2023 › Forums › Digital DJ Gear › Problems with Marker/Sticker drift on DDJ-SX2

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • July 25, 2016 at 8:27 am #2422451
    Terry_42
    Keymaster

    Hmm that is strange usually the SX2 should be spot on.
    I do not have an SX2 but tried it with my MCX8000 and the LEDs and platters are spot on.
    Do you have the latest firmware installed etc.?

    July 25, 2016 at 12:18 pm #2422621
    Terry Minett
    Participant

    My reply isn’t working.

    Everything is the latest.

    I recorded a short video here:
    minett.com.au/DJ-Static/DDJ-SX2 Sticker Drift.mov

    July 26, 2016 at 10:54 am #2423041
    Terry_42
    Keymaster

    That is surely not normal, there seems to be something wrong here.
    Do you use Windows or Mac? If Windows: What driver you using? Is this a clean install?

    July 26, 2016 at 12:23 pm #2423091
    Terry Minett
    Participant

    Windows drivers are the latest and stated above. I purposely purchased this notebook for music earlier this month:
    Alienware 13
    16gb ram
    512 solid state drive
    everything is new and clean.

    I might mess with the platter sensitivity. Maybe I’m not conductive enough lol.

    July 27, 2016 at 9:43 am #2423361
    Terry_42
    Keymaster

    Try the following please:
    Let a track play for a few seconds, touch the platter (so the track should stop, do not scratch), raise hand and let play again.
    The latency between you touching the platter and stopping the track should be minimal, so should the you raising hand and track resuming be.
    If there is a huge latency as in the video, then there is something wrong with the unit, if it is OK then it really could be snesitivity or the way you touch the platter.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • The forum ‘Digital DJ Gear’ is closed to new topics and replies.