x

Virtual dj settings? latency

Home 2023 › Forums › DJing Software › Virtual dj settings? latency

Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Posts
  • February 23, 2015 at 4:05 pm #2145581
    deathy
    Participant

    Does it improve if you unplug the controller and test it with just mouse/keyboard?

    February 23, 2015 at 5:35 pm #2145701
    DJ Vintage
    Moderator

    Well … going from auto to 5ms is going the wrong direction if latency is your problem. What you want to do is EXTEND the latency setting to a higher number of ms. Make a big jump higher and if it’s gone, then start babystepping back until it occurs again. You’ll have found the best setting your system can handle.

    I am not sure what you mean by stretching, but if it involves lots of processor-heavy audio manipulation, I can imagine you get problems. Since you don’t mention what kind of laptop/computer you are using not much I can say to that end of the equation.

    Finally, I do assume you have the latest updated (audio) drivers installed?

    February 23, 2015 at 6:02 pm #2145741
    bob6397
    Participant

    On my windows 8.1 laptop, i run VDJ 8 at around 10ms latency through my Focusrite 2i4 with the ASIO drivers for it (at 24bit, 96KHz) – with VDJ set to:

    SAMPLE RATE: 96000
    LATENCY: “Automatic (288)”
    ultralatency off
    overclock on
    and all the quality settings on max

    These may not be the best settings for you, but they work for me.. 🙂

    And I can’t find “Advanced Stretching – or anything to do with stretching – anywhere??

    If on Windows:

    Check your USB drivers – make sure they are up to date, re-install the drivers for your soundcard (whilst it is plugged in) and then only use it on that one USB port – it does matter. And then reset the settings in VDJ.

    If you are on a Mac:

    Install any relevant Core Audio drivers (if applicable) and reset the settings in VDJ.

    If that doesn’t sort it, I don’t know…

    February 23, 2015 at 6:03 pm #2145751
    bob6397
    Participant

    And which version of VDJ are on?? I’m on the latest update of 8 🙂

    February 23, 2015 at 8:09 pm #2145861
    Jonas Desousa
    Participant

    i have a Denon MC3000 controller what version of virtual Dj it work with can you help?

    February 23, 2015 at 8:13 pm #2145871
    Jonas Desousa
    Participant

    hi guys im having some problem in set up MC3000 with Traktor Pro i can only only listen to one channel on the Headphone what i am doing wrong?

    February 24, 2015 at 9:34 am #2146251
    DJ Vintage
    Moderator

    Don’t know too much about audio settings in VDJ, but is sure sounds like something is set wrong there.

    February 24, 2015 at 11:24 am #2146441
    deathy
    Participant

    Howdy, Jonas – You will get a more positive response by creating your own topic rather than adding unrelated questions to an existing thread. The “new post” thingy is at the bottom of the forum page where you would want to post it. Hope that helps.

    February 25, 2015 at 2:04 am #2146821
    Dj Emazing
    Participant

    @ Fgjghkhlfxl Xfhfgjkgxhk

    Virtual Dj 7 try these
    Sound Card 512(11ms)
    Safe Mode should be unchecked
    Optimize for Quality
    Master Tempo (I chose Purescratch no master tempo)
    48Khz Conversion Faster Resampling

    Virtual Dj 8 try these
    Performance
    Samplerate 41000
    latency 512(11ms)
    ultralatency no
    overclock no
    pitchquality 2
    scratchfilter 9

    February 25, 2015 at 9:32 pm #2147321
    bob6397
    Participant

    Is that sample rate 44100 not 41000 ???

    Didn’t know that 41000 was a standard.. 😉

    February 25, 2015 at 10:09 pm #2147341
    DJ Vintage
    Moderator

    One would certainly hope so lol

    February 25, 2015 at 10:21 pm #2147351
    Dj Emazing
    Participant

    44100 sorry about that

  • Author
    Posts
Viewing 12 posts - 1 through 12 (of 12 total)
  • The forum ‘DJing Software’ is closed to new topics and replies.