x

Traktor & DJM-900n question

Home 2023 › Forums › Digital DJ Gear › Traktor & DJM-900n question

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • April 10, 2014 at 11:14 pm #2022747
    DJ Vintage
    Moderator

    You can set the 900s to work as controllers. No need for time-code. If you route the audio output for the channels controlled by the 900s back to the 900s, you can leave them hooked up to the mixer and use them that way.

    Essentially you want to make sure your routing is correct for everything. I do know it’s possible to make Traktor work with more than one controller, I also know it’s not the most easy thing to do. Especially if you have no access to 900s to try out the setup with.

    Greetinx.

    April 11, 2014 at 11:47 pm #2022878
    Eliah Holiday
    Participant

    Ok so I hook up my laptop to the mixer via USB and set the mixer as audio card ( I guess I need a driver or no for Mac?), from there I set outputs I assume A to Channel 1/2, B to Channel 3/4, C to channel 1/2 and D to channel 3/4. Oh and set it to external mixing. My controller plug to the laptop and…That should do it?

    April 12, 2014 at 2:37 am #2022893
    DJ Vintage
    Moderator

    No driver needed for Mac. But not quite the setup you describe.

    Sorry, misread your original text. Thought you were playing with a set of CDJs not a DJM900 :-).

    Then looking at your setup, yep you are right. Use the internal sound card on the 900 with the setup you described and you are good to go.

    Greetinx.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Digital DJ Gear’ is closed to new topics and replies.