HELP!!!! DN-MC6000 Level Meter LED's Not Working

This topic has 8 replies, 1 voice, and was last updated 13 years, 10 months ago by DJ Doc.

Viewing 8 posts - 1 through 8 (of 8 total)

Author

Posts
February 21, 2012 at 1:04 am #15324

eros
Member

DJ Doc, post: 15355, member: 1265 wrote: After installing the latest tsi file for traktor pro2 2/4 deck MIDI mapping, I noticed that the level meter led’s are not functioning while I set the rear of my MC6000 to PC MIX. It works well though during startup or when I set the rear switch to INT MIX.

Any solutions or ideas?

Mate anything Denon then Hessler is your man. I’m sure he’ll come across this thread eventually but if you need to solve the problem fast just fire him off a message.

February 21, 2012 at 1:30 am #15325

DJ Doc
Participant

Hess is the man when it comes to Denon. He sure knows his stuff right! Let’s hope he comes across this thread and have an answer that perhaps other members might benefit from besides me.

February 21, 2012 at 5:12 am #15334

eros
Member

lol…yeah Hess is definitely the man when it comes to Denon. Personally I think they should employ him !!

February 23, 2012 at 5:52 am #15458

DJ Doc
Participant

Anyone else out there knows how to fix this problem or had an experience like it before?

February 23, 2012 at 3:32 pm #15506

Pär Hessler
Participant

DJ Doc, post: 15355, member: 1265 wrote: After installing the latest tsi file for traktor pro2 2/4 deck MIDI mapping, I noticed that the level meter led’s are not functioning while I set the rear of my MC6000 to PC MIX. It works well though during startup or when I set the rear switch to INT MIX.

Any solutions or ideas?

I am sorry that it took me some time to find your post!
I am currantly at home with a bad cold and heavy headake 🙁

To your problem. I could not recunstruct that on my MC6000
But I have an Idea.

There is a small switch right over the level meaters.
Could it be that you accidently has switched it to the middle??

To the left (CH 2/3) You get the left meter for Channel 2 and the right for Channel 3)
In the middle possision (Ch 1/4) As 2/3 but for 1/4)
To the right (MASTER) You get master left and right.

I hope that is the case, otherwise ask again….

February 24, 2012 at 7:32 am #1003087

DJ Doc
Participant

DJ Hessler, post: 15579, member: 537 wrote: I am sorry that it took me some time to find your post!
I am currantly at home with a bad cold and heavy headake 🙁

To your problem. I could not recunstruct that on my MC6000
But I have an Idea.

There is a small switch right over the level meaters.
Could it be that you accidently has switched it to the middle??

To the left (CH 2/3) You get the left meter for Channel 2 and the right for Channel 3)
In the middle possision (Ch 1/4) As 2/3 but for 1/4)
To the right (MASTER) You get master left and right.

I hope that is the case, otherwise ask again….

No worries Hess. Hope you get well soon buddy. Regarding your question, I currently have my switch to 2/4. It won’t work even if I switch it to 2/4 or Audio or Video through CF Mode.

Anyway, here’s the deal.. After further research online, I stumbled across a couple of tsi files that should eventually solve the problem. Because I am a total nnob when it comes to tsi files or firmware, I thought I’d ask here first. It says in the instruction that I should add “the” tsi file in conjunction with standard Denon mapping for the MC6000.

Can anyone explain what that really means and how to do that?

Here’s a link to the tsi file I found:
http://www.traktorbible.com/freaks/mappingview.aspx?id=194

February 24, 2012 at 11:04 am #15580

Pär Hessler
Participant

First off, Are you sure that you have the latest upgrade for the MC6000 internal software?
And the latest upgrade for Traktor software?
And the latest MIDI mapping from Denon?
And ASIO driver if you runs on PC

Make absolutely sure that you do b4 lounching that .tsi from Traktor Bible.

http://www.dm-pro.eu/en/denondj/products/55/dn-mc6000-full-mixer-4deck-midi-controller/

For updating Traktor you do it in the software
Help/Lounch Servicecenter….

Latest MIDI mapping for MC6000 comes with the update in the zip file…

I have no problem with my MC6000,
Latest SW and .TSI from Denon Internal Mix / Mac /

Only more thing I can think of is if you have your channel level very low so it is below -20db??

It should work, I know noone else who has that problem!

May 11, 2012 at 9:51 am #1004273

Anonymous
Guest

So me and my buddy have been talking about installing some led panel light around the Tacoma. We’re thinking about doing it under the front seats and under the dashboard and driver side, but we’re led outdoor lighting not very technical with these kinds of things. (Not a good start, I know).

So I wanted to come here to ask where I can get these ideal led strip lights 12v , and how to install them. Any advice helps as this would be our first project on the Tacoma and wouldn’t want to screw anything up.
Author

Posts

Viewing 8 posts - 1 through 8 (of 8 total)

The forum ‘Digital DJ Gear’ is closed to new topics and replies.